TYPE OF USE: High Performance Fuel Economy Engine Oil specially designed for FORD and OEMs requiring low friction and very low HTHS (High Temperature High Shear) viscosity oil (= 2.6 mPa.s): FORD, JAGUAR, LAND ROVER, CHRYSLER, JEEP, Suitable also for Gasoline engines requiring a 5W-20 viscosity grade Fuel Economy lubricant type with ACEA A1 / B1 or API SN standards. Compatible with catalytic converters. Suitable for all types of gasolines and biofuels. ;PERFORMANCES: This 100percent Synthetic engine oil is formulated to lubricate perfectly the latest generation of FORD Gasoline engines, except Ford Ka 2009 (08/2008) requiring 917 A, Ford Focus ST 2.5L Duratec (2004) requiring 913 D, Ford Focus RS (2004) requiring 937 A, and also 1.3L, 1.6L and 1.8L Duratec engines requiring 913 D.; The specification FORD WSS M2C 948 B is especially required for the 1.0L EcoBoost 3-cylinder Gasoline engines, but it is also fully compatible with the other FORD Gasoline engines, apart from exceptions. Therefore specification FORD WSS M2C 948 B covers most Gasoline engines currently requiring specifications FORD WSS M2C 913 A, 913 B, 913 C, or 925 A, 925 B as for JAGUAR and LAND ROVER. For these JAGUAR and LAND ROVER engines requiring previously FORD WSS M2C 925A or 925B standards, the specification STJLR.03.5004 now applies as a replacement. STJLR.03.5004 covers most of JAGUAR LAND ROVER Gasoline engines except for V6 and V8 supercharged.; Associated with ACEA A1/B1 an API SN standards for lubricants, MOTUL SPECIFIC 948 B 5W-20 provides significant energy savings (>3.3percent) while maintaining, and even exceeding in some cases, robustness requirements of 913 C. This improved fuel economy and low emissions performance meet these OEMs requirements for CO2 emissions reductions. ;RECOMMENDATIONS: MOTUL SPECIFIC 948 B 5W-20 can be mixed with synthetic or mineral oils. Before use always refer to the owner manual of the vehicle.